Non-Wovon Nylon Abrasives Introduction

Non-woven abrasives, also known as Non-woven Abrasives or Nylon Abrasives, are made from a non-woven fabric composed of special fibers, with abrasives and binders added to create a three-dimensional, highly elastic, flexible abrasive. The main abrasives used are corundum and silicon carbide. Variations in abrasives and particle sizes result in a wide variety of shapes, sizes, and applications. While non-woven abrasives are often listed as a separate category in many international product catalogs, they have also experienced rapid growth in China over the past decade.

The non-woven abrasives are classified according to their shapes as follows:

As shown above, non-woven abrasives are currently divided into seven categories with the following attributes:

Industrial scouring pads refer to sheet-shaped scouring pads and scouring pads with sponges.

Type: Hand Pads, Sanding Sponge;

Product Color: Black, Blue, Brown, Beige, Dark Brown, Gray, Green, Gold, Maroon, Red, Tan, White, Other;

Abrasive Grain: No Grain, Aluminum Oxide, White Aluminum Oxide, Silicon Carbide, Specialty;

Grade: No Grit, Extra Coarse (12-40#), Coarse (50-80#), Medium (100-150#),

Fine (180-220#), Very Fine (240-360#), Ultra-Fine (400-600#), Micro Fine (800-1200#);

Materials Abraded: Ceramic, Chrome, Fiberglass, Glass, Metal, Nickel, Nonferrous Metal, Plastics,

Plywood, Stainless Steel, Titanium, Tantalum, Wood, Zinc, Universal, Other;

The particle size attribute is not designed according to the coated abrasives, but only specifies the range and is set as a single choice.

These rolls can be cut into sheets, so the color, abrasive, grit, and application materials are not detailed here. The properties are the same as for industrial scouring pads.

Width: Common widths from 50 to 230 mm are available.

Nylon discs are any disc-shaped abrasive tool punched or made from non-woven fabric, such as those used in angle grinders, straight grinders, and sanding machines. Their color, abrasive, grit, and application materials are consistent with those of industrial scouring pads.

Diameter: Common diameters from 20 to 300 mm are collected for selection;

Fastening Type: None, Hook & Loop, Quick Change, Arbor Hole, Other;

Nylon wheels are any non-woven abrasive wheel, such as those used on angle grinders, straight grinders, engraving grinders, and grinding machines. Their color, abrasive, grit, and application materials are consistent with those of industrial scouring pads.

Type: Clean & Strip Wheel, Convolute Wheel, Unitized Wheel, Specialty Wheel

Diameter: Common diameters from 25 to 400 mm are available.

The product's color, abrasive, grit, and application materials are consistent with industrial scouring pads.

Width: Available in common widths from 3 to 150 mm.

Flying Wing Wheels and Wire Drawing Wheels can be displayed in this category.

The product color, abrasive, grit size, and application materials have the same attribute values ​​as industrial scouring pads.

Shape: Shank-Mounted, Tread-Mounted, Arbor Holes, and Interleaved.
Diameter: Common diameters from 25 to 500 mm are available.

This section allows for the inclusion of special-shaped items such as handle scouring pads and non-woven abrasive tips. We haven't delved deeper into the properties of non-woven abrasives yet, but we will make further adjustments based on actual needs as the number of non-woven abrasives increases.